China wholesale Permanent And Induced Magnets - Lamination Neodymium magnet can reduce the eddy current loss – Xinfeng Detail:
PRODUCT INTRODUCTION
Laminated rare earth magnets can reduce eddy current losses in high-efficiency motors. Smaller eddy current losses mean lower heat and higher efficiency.
In permanent magnet synchronous motors, the eddy current losses in the rotor are ignored because the rotor and stator are rotating synchronously. In fact, stator slot effects, non-sinusoidal distribution of winding magnetic forces and harmonic magnetic potentials generated by harmonic currents in the coil winding also cause eddy current losses in the rotor, rotor yoke and metal permanent magnets binding the permanent magnet sheath
Since the maximum operating temperature of sintered NdFeB magnets is 220 ° C (N35AH), the higher the operating temperature, the lower the magnetism of the NdFeB magnets, the lower the conversion and power of the motor. This is called heat loss! These eddy current losses can lead to elevated temperatures, leading to local demagnetization of permanent magnets, which is particularly severe in some high speed or high frequency permanent magnet synchronous motor.
Heat loss is mainly caused by electromagnetic eddy current during motor operation. Therefore, multiple stacking methods (which require insulation between each magnet) to reduce this heat loss.
TECHNICAL REQUIREMENTS
1.The thinnest insulation, < 20 microns;
2.Performance at temperatures up to 220˚C;
3.Magnet layers from 0.5 mm and above are custom shaped and sized neodymium magnets.
SCOPE OF APPLICATION
High-speed permanent magnet motors, aerospace, automotive, motorsport and industrial markets are turning to laminated rare earth magnets and are working to balance the tradeoff between power and heat.
Advantages: it can reduce the energy loss caused by electromagnetic eddy current.
PRODUCT DISPLAY
15 section magnet with spray epoxy coating
Block laminated magnet
Laminate magnet fanshaped
Laminated magnet – arc
Laminated magnet – large arc
Laminated magnet block shape
Multiple bonded magnetic assemblies with grooves
Segmental laminated neodymium magnet
Smallest arc magnet
Product detail pictures:
Related Product Guide:
The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for China wholesale Permanent And Induced Magnets - Lamination Neodymium magnet can reduce the eddy current loss – Xinfeng , The product will supply to all over the world, such as: Armenia, Algeria, United Arab emirates, We hope we can establish long-term cooperation with all of the customers, and hope we can improve competitiveness and achieve the win-win situation together with the customers. We sincerely welcome the customers from all over the world to contact us for anything you need to have!Welcome all customers both at home and abroad to visit our factory. We hope to have win-win business relationships with you, and create a better tomorrow.
By Maureen from Cambodia - 2017.03.08 14:45
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Joa from Islamabad - 2017.10.13 10:47
Write your message here and send it to us