Fast delivery Induced And Permanent Magnets - Lamination Neodymium magnet can reduce the eddy current loss – Xinfeng Detail:
PRODUCT INTRODUCTION
Laminated rare earth magnets can reduce eddy current losses in high-efficiency motors. Smaller eddy current losses mean lower heat and higher efficiency.
In permanent magnet synchronous motors, the eddy current losses in the rotor are ignored because the rotor and stator are rotating synchronously. In fact, stator slot effects, non-sinusoidal distribution of winding magnetic forces and harmonic magnetic potentials generated by harmonic currents in the coil winding also cause eddy current losses in the rotor, rotor yoke and metal permanent magnets binding the permanent magnet sheath
Since the maximum operating temperature of sintered NdFeB magnets is 220 ° C (N35AH), the higher the operating temperature, the lower the magnetism of the NdFeB magnets, the lower the conversion and power of the motor. This is called heat loss! These eddy current losses can lead to elevated temperatures, leading to local demagnetization of permanent magnets, which is particularly severe in some high speed or high frequency permanent magnet synchronous motor.
Heat loss is mainly caused by electromagnetic eddy current during motor operation. Therefore, multiple stacking methods (which require insulation between each magnet) to reduce this heat loss.
TECHNICAL REQUIREMENTS
1.The thinnest insulation, < 20 microns;
2.Performance at temperatures up to 220˚C;
3.Magnet layers from 0.5 mm and above are custom shaped and sized neodymium magnets.
SCOPE OF APPLICATION
High-speed permanent magnet motors, aerospace, automotive, motorsport and industrial markets are turning to laminated rare earth magnets and are working to balance the tradeoff between power and heat.
Advantages: it can reduce the energy loss caused by electromagnetic eddy current.
PRODUCT DISPLAY
15 section magnet with spray epoxy coating
Block laminated magnet
Laminate magnet fanshaped
Laminated magnet – arc
Laminated magnet – large arc
Laminated magnet block shape
Multiple bonded magnetic assemblies with grooves
Segmental laminated neodymium magnet
Smallest arc magnet
Product detail pictures:
Related Product Guide:
abide by the contract", conforms into the market requirement, joins in the market competition by its good quality also as provides a lot more comprehensive and great company for purchasers to let them turn into huge winner. The pursue from the firm, would be the clients' gratification for Fast delivery Induced And Permanent Magnets - Lamination Neodymium magnet can reduce the eddy current loss – Xinfeng , The product will supply to all over the world, such as: Singapore, Slovakia, Vietnam, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
By Salome from Seychelles - 2018.12.10 19:03
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Alice from Hungary - 2018.11.02 11:11
Write your message here and send it to us