Original Factory Permanent Lifting Magnets - Lamination Neodymium magnet can reduce the eddy current loss – Xinfeng Detail:
PRODUCT INTRODUCTION
Laminated rare earth magnets can reduce eddy current losses in high-efficiency motors. Smaller eddy current losses mean lower heat and higher efficiency.
In permanent magnet synchronous motors, the eddy current losses in the rotor are ignored because the rotor and stator are rotating synchronously. In fact, stator slot effects, non-sinusoidal distribution of winding magnetic forces and harmonic magnetic potentials generated by harmonic currents in the coil winding also cause eddy current losses in the rotor, rotor yoke and metal permanent magnets binding the permanent magnet sheath
Since the maximum operating temperature of sintered NdFeB magnets is 220 ° C (N35AH), the higher the operating temperature, the lower the magnetism of the NdFeB magnets, the lower the conversion and power of the motor. This is called heat loss! These eddy current losses can lead to elevated temperatures, leading to local demagnetization of permanent magnets, which is particularly severe in some high speed or high frequency permanent magnet synchronous motor.
Heat loss is mainly caused by electromagnetic eddy current during motor operation. Therefore, multiple stacking methods (which require insulation between each magnet) to reduce this heat loss.
TECHNICAL REQUIREMENTS
1.The thinnest insulation, < 20 microns;
2.Performance at temperatures up to 220˚C;
3.Magnet layers from 0.5 mm and above are custom shaped and sized neodymium magnets.
SCOPE OF APPLICATION
High-speed permanent magnet motors, aerospace, automotive, motorsport and industrial markets are turning to laminated rare earth magnets and are working to balance the tradeoff between power and heat.
Advantages: it can reduce the energy loss caused by electromagnetic eddy current.
PRODUCT DISPLAY
15 section magnet with spray epoxy coating
Block laminated magnet
Laminate magnet fanshaped
Laminated magnet – arc
Laminated magnet – large arc
Laminated magnet block shape
Multiple bonded magnetic assemblies with grooves
Segmental laminated neodymium magnet
Smallest arc magnet
Product detail pictures:
Related Product Guide:
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of Original Factory Permanent Lifting Magnets - Lamination Neodymium magnet can reduce the eddy current loss – Xinfeng , The product will supply to all over the world, such as: France, Lisbon, European, Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.
By Julia from Latvia - 2018.11.06 10:04
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Doreen from Guyana - 2018.12.22 12:52
Write your message here and send it to us